|
 |
United Truck Body Co.,
located in Duluth, Minnesota
United Truck is a distributor of Knapheide, Stahl,
Astoria, and Alum-Line brands of service bodies. We can provide steel, fiberglass, and
aluminum service bodies for truck chassis with GVWR ratings of 8,600 lbs. to 33,000 lbs.
and cab to axle measurements from 56" to 120" and more.
Here are a few examples of the service bodies we
can install for you.
 |
Knapheide Model KSS Contoured
Automotive Styling, Triple Contact Door Seals, Wrap Around Tail
Lights, Complete Immersion in K-Coat Prime Paint, Complete
Undercoating, 56", 60" and 84" CA Models Available, KSS
Appearance Tailored to Ford, Dodge & GM, Removable Pickup Style
Tailgate, Automotive Style Door Latches, Concealed Door Hinges,
40" High Standard and Flip-Top Models, Customize with Option
Fit™ Options |
 |
Knapheide Model 600 Series
service body with standard canopy roof, giving a interior clear
height of 73". This body/canopy combination is ideal for a
chassis cab with a GVWR of 15,000 lbs., or greater. Cab to
axle measurement required on the chassis cab is 84". |
 |
Astoria service body
(fiberglass) mounted on a 3/4 ton chassis (8600 lb. GVWR or
larger) with single rear wheels and 54-56" cab to axle
measurement. Unit is equipped with a screened front bulkhead and
side ladder rack on curb side. This body will accommodate single
or dual fuel tanks. |
 |
Stahl 132" Grand Challenger body
for a truck with a 84" cab to axle measurement and rear dual
wheels. GVWR should be a minimum of 11,000 lbs. United Truck can
paint bodies to match the chassis cab including basecoat/clear
coat. This unit is an example of this paint process.
|
 |
 |
Knapheide 108" service body with
20" wide compartments installed with a 60" cab to axle
measurement and rear dual wheels. GVWR of 11,000 or greater.
This unit has been customized at United Truck so welding bottles
can be stored in the left front compartment. The right front
compartment has been cut out to floor level so a gas powered
welder can be stored on the floor and be accessed from the right
front.t. |
 |
Knapheide 155" service
body with 20" wide compartments installed on a ISUZU with a 111.9" cab to axle
measurement and rear dual wheels. Unit is designed for the ISUZU and its narrower frame
width. This installation included an overhead ladder rack and rear step bumper with recess
for trailer hitch. Body dimensions in addition to length of 155", are height
40", width 89", floor width 49". |
To locate a dealer
near you click on a logo below.
For more information or a quote click here
Contact us
|
